How To Tie Peep Sight Tubing

In the world of archery, the compound bow stands at the forefront, blending innovation and tradition into a powerful tool. With its system of cables, pulleys, and cams, the compound bow allows archers to hold a high poundage at full draw and take their time aiming. This guide provides an overview of the key components of a compound bow, the advantages it offers, tips for choosing the right one, and essential maintenance and safety practices. Whether you’re a seasoned archer or a beginner, the compound bow offers an exciting and unique experience in the world of archery.

What is Peep Sight Tubing?

Peep sight tubing refers to the thin, flexible tubing that is used to attach a peep sight to the bowstring of a compound bow. A peep sight is a small, circular device that is placed in the bowstring and allows the archer to aim more accurately. The tubing serves as a connection between the peep sight and the bowstring, ensuring that the peep sight remains in the correct position throughout the shot.

Importance of Peep Sight Tubing

Peep sight tubing is an essential component of a compound bow setup, as it plays a critical role in ensuring accuracy and consistency in archery. By connecting the peep sight to the bowstring, the tubing helps the archer establish a consistent anchor point for their shot. This is crucial for maintaining proper form and alignment, which directly impact accuracy. Without the tubing, the peep sight could easily shift or become misaligned, leading to inconsistent shots and frustration for the archer.

Materials Needed

Before you begin attaching peep sight tubing to your compound bow, you’ll need a few materials:

• Compound bow: Make sure your bow is in good working condition and properly set up.
• Bowstring: Choose a high-quality bowstring that matches the specifications of your bow.
• Peep sight: Select a peep sight that is the appropriate size for your bow and your shooting style.
• Peep sight tubing: Acquire a length of tubing that is suitable for your bowstring and peep sight.

Step 1: Prepare the Bow

Before you can attach the peep sight tubing, it’s important to prepare your bow. Ensure that your bow is in good working condition by inspecting the limbs, cams, cables, and strings for any signs of wear or damage. Make any necessary repairs or replacements before continuing with the tubing installation.

Step 2: Measure and Cut the Tubing

Measure the required length of tubing by holding it up against your bowstring and peep sight. Leave some extra length on each end to allow for adjustments. Once you have determined the appropriate length, use a pair of sharp scissors or a tubing cutter to cleanly cut the tubing.

Step 3: Attach the Tubing to the BowString

Take one end of the tubing and slide it over the top of the bowstring. Ensure that the tubing is securely positioned just above the knocking point, where the arrow is placed. Gently push the tubing down until it is snug against the bowstring.

Step 4: Adjust the Tubing Position

With the tubing attached to the bowstring, position the peep sight at the desired height on the tubing. This will vary depending on your personal shooting preferences and the alignment of your bow. Slide the peep sight up or down the tubing until you find the optimal position that allows for comfortable and accurate shooting.

Step 5: Secure the Tubing

Once you are satisfied with the position of the peep sight, it’s time to secure the tubing in place. Depending on the type of tubing you are using, you may need to tie knots or use other securing methods to prevent the tubing from shifting during shooting. Ensure that the tubing is firmly secured but not too tight, as it should still have some flexibility to accommodate any slight movements.

Step 6: Test and Fine-Tune

With the peep sight tubing attached and secured, it’s crucial to test its functionality. Draw the bow back and check if the peep sight aligns properly with your eye. Make any necessary adjustments to the tubing or peep sight position to ensure that you have a clear and consistent sight picture. Take some practice shots to confirm that the tubing and peep sight are functioning correctly and providing the desired accuracy.

Common Mistakes to Avoid

When attaching peep sight tubing to your compound bow, there are a few common mistakes to watch out for:

• Using incorrect tubing size: Ensure that the diameter of the tubing matches the size of your bowstring and peep sight to ensure a secure fit.
• Improper placement: Position the tubing and peep sight at the correct height on your bowstring to achieve optimal alignment and accuracy.
• Insufficient securing: Make sure that the tubing is securely fastened in place to prevent any movement during shooting, but avoid overtightening, as it can restrict flexibility and cause issues.

By avoiding these common mistakes and following the steps outlined above, you can successfully attach peep sight tubing to your compound bow and enhance your shooting accuracy and consistency.