When is It Too Late to Make a Mock Scrape

It is generally accepted that mock scrapes should be made early in the season, around the time when bucks are shedding their velvet. However, some deer hunters believe that it is never too late to make a mock scrape. They argue that bucks will continue to visit scrapes throughout the season, regardless of when they were made.

While there is no definitive answer, most experts agree that earlier is better when it comes to making mock scrapes.

When is It Too Late to Make a Mock Scrape? The answer may surprise you, but the simple answer is no, it’s never too late! Even if you’ve waited until the last minute and all of your buddies have already made their mock scrapes, there’s still time for you to make yours.

Here’s why: making a mock scrape is one of the best ways to lure in deer, especially during the rut. By imitating the scraping behavior of bucks, does will be drawn to your scrape and be more likely to mate with the buck that created it. So even though it may seem like everyone else has a head start on you, don’t worry – your mock scrape can still be just as effective.

Here are a few tips to help you get started: 1) Choose a good location – look for an area that gets lots of deer traffic; 2) Make sure the ground is soft enough to rake;

3) Use scent-free soap or urine to create realistic smells; and 4) Be patient – it may take a little while for deer to find your scrape. With these tips in mind, go out and make your own mock scrape – it could be just what you need to attract that big buck this season!

How to Make a Mock Scrape

A mock scrape is a great way to attract deer and get them on your property. Making a mock scrape is easy, and only requires a few supplies. Here’s what you need to do:

1. Find an area where deer frequent. This could be along a fence line, near a food plot, or in thick cover. 2. Use your hand or a stick to clear away any leaves or debris from an area about the size of your hand.

3. Pee in the clearing (this step is optional but will help attract deer). 4. Place an object in the clearing that will simulate a buck’s scent glands, such as Tink’s #69 Doe-In-Rut Buck Lure . 5. Cover the entire area with leaves or brush so it looks undisturbed.

Best Scent for Mock Scrapes

A mock scrape is a great way to attract deer to your hunting area. The best scent for a mock scrape is doe urine. This will attract bucks to the area and make them more likely to visit the scrape.

You can also add some other scents, such as buck urine or anise, to the mock scrape to make it more attractive to deer.

Mock Scrape Kit

A mock scrape is a great way to bring deer into your hunting area. By creating a fake scrape, you can lure in bucks that are looking for does in heat. Bucks will often visit scrapes to check for signs of other deer, and by making your own mock scrape, you can attract them right to your stand!

To create a mock scrape, start by finding a likely spot where a buck would make his own scrape. Then, use an object like a stick or your boot to make some scuff marks in the ground. Next, add some fresh urine to the mix – either from yourself or from a doe in estrus.

Finally, add some sort of visual attractant like leaves or branches. Bucks are attracted to mock scrapes because they think there may be receptive does nearby. By setting up your own mock scrape, you can bring the bucks right to your stand!

Mock Scrapes in September

If you’re a whitetail enthusiast, September is the time to start making mock scrapes. Mock scrapes are areas where deer have scratched away the leaves and debris from a small patch of ground, exposing the bare earth beneath. These scrapes are used by bucks to communicate their presence to other deer in the area and can be incredibly effective tools for attracting and holding deer on your property.

To create a mock scrape, simply clear away the leaves and debris from a small patch of ground using your hands or a rake. Once the bare ground is exposed, apply a liberal amount of doe urine to the area. You can purchase doe urine at most hunting stores or online retailers.

Once you’ve created your mock scrape, check it regularly to see if any deer are using it. If you find that bucks are utilizing your scrape, consider placing a trail camera nearby so you can monitor activity and perhaps even pattern individual bucks.

How-To Make a Mock Scrape With a Dripper

When you’re out in the field scouting for deer, one of the things you’ll want to look for are mock scrapes. A mock scrape is a spot where a buck has used his hooves to scrape away the leaves and dirt from an area, exposing the bare ground beneath. These scrapes can be found along trails, at the base of trees, or anywhere else that a deer has access to.

While finding a naturally occurring mock scrape can give you some insight into where deer are traveling and where they might be bedding down, creating your own mock scrape can be even more beneficial. By placing a dripper above your mock scrape, you can attract deer to the area and get them used to coming in close to your stand location. Additionally, using scent products in conjunction with your dripper will help further entice deer to visit and investigate your mock scrape.

Here’s how to make your own mock scrape with a dripper: 1. Find a suitable spot for your mock scrape. Look for an area along a travel route that gets plenty of sun during the day and isn’t too close to bedding areas or food sources.

You want deer to feel safe approaching your mock scrape so they don’t spook easily. 2. Once you’ve selected a spot, use your boot or hoof to clear away any leaves or debris from the area, exposing the bare ground beneath. Make sure the area is large enough for several deer to comfortably visit at once (about 3ft x 3ft).

3. Place your dripper above the center of the exposed ground and secure it in place with rocks or sticks so it doesn’t tip over easily. Be sure not to place it too high off the ground – you want deer to be able to reach it without having trouble drinking from it (about 2-3 feet off the ground is ideal). 4 Fill up your dripper with water and set it on a timer so it runs for about 30 minutes each day (you can experiment with different time periods until you find what works best in your area).

Keep an eye on weather conditions as well – if it rains heavily or there is snow melt, you may need to adjust how often you run your dripper accordingly so water doesn’t pool up aroundthe edges of your mock scrape.

How Many Mock Scrapes Should I Make

Mock scrapes are a great way to attract deer and get them used to your scent. But how many mock scrapes should you make? One rule of thumb is to make one mock scrape for every 10 acres of land that you own.

So, if you own 100 acres, you would make 10 mock scrapes. Another way to determine how many mock scrapes to make is by the amount of deer sign that you see on your property. If you have a lot of deer tracks and rubs, then you can probably get away with making fewer mock scrapes.

If you don’t see much sign, then you might need to make more mock scrapes in order to attract deer. Whatever method you use, just remember that more isn’t always better when it comes to making mock scrapes. You don’t want to overwhelm the deer with too many smells, so stick with a few well-placed mock scrapes and let nature do the rest!

Mock Scrape Dripper

A mock scrape is a spot on a deer’s trail where the ground has been cleared of leaves and other debris, exposing the bare dirt. Bucks will often visit these scrapes to smell the ground and urine left behind by other deer, as well as to leave their own scent. By creating a mock scrape and adding your own scent to it, you can attract bucks to a specific area.

To create a mock scrape, start by clearing an area of leaves and other debris from the ground. Next, urinate in the center of the scrape. You can also add additional scents or lures to further attract deer.

Finally, cover the scrape with branches or leaves to protect it from the elements. Mock scrapes can be an effective way to attract deer to a specific area. By following these steps, you can create your own mock scrape that will bring bucks right to your doorstep!

Mock Scrape near Feeder

A mock scrape near a feeder can be an effective way to attract deer. By creating a mock scrape, you are imitating the natural behavior of deer and providing them with a place to congregate. Feeders are often located in areas where there is not much natural browse for deer, so a mock scrape can provide them with a valuable source of food.

When creating a mock scrape, it is important to use fresh dirt and leaves. You can also add some corn or other bait to the scrape to further attract deer. Once you have created the scrape, it is important to check it regularly and replenish the bait as needed.

Credit: www.northamericanwhitetail.com

What Time of Year Should I Make a Mock Scrape?

A mock scrape is a spot where a buck has scraped away the leaves and other debris to expose the bare ground. These scrapes are usually about 2-4 feet in diameter and are often situated near a tree or bush. Mock scrapes are used by bucks to communicate their presence to other deer, as well as to mark their territory.

The best time of year to make a mock scrape is during the pre-rut, which typically occurs in late October and early November. This is when bucks are beginning to establish their dominance and start seeking out mates. By making your own mock scrape, you can attract deer into your hunting area and increase your chances of success during this crucial time period.

Do Bucks Check Scrapes in Late Season?

In the late season, bucks will continue to check scrapes. However, they will be less likely to do so if they do not smell a doe’s urine in the scrape. If a buck smells a doe’s urine in a scrape, he will know that she has been there recently and is likely still in the area.

This information is important to the buck because it means that he has a chance to mate with her.

How Late Do Deer Use Scrapes?

The peak scrape-making activity for whitetails usually occurs during the rut, with bucks working scrapes more feverishly in the weeks leading up to and immediately following the peak of breeding activity. However, bucks will continue to use scrapes throughout the winter months as a way to communicate with other deer. So if you find a scrape in late December or early January, don’t be surprised—it’s likely that a buck made it recently.

Should You Hunt Scrapes Late Season?

Late season scrapes can be a great place to hunt, but there are a few things to keep in mind. First, remember that deer will often bed down in or near scrapes during the day, so you may want to hunt them early in the morning or evening. Second, consider using a decoy or scent attractant to bring bucks into range.

Finally, be sure to stay quiet and still while hunting scrapes – any movement or noise could scare deer away.

When To Start A Mock Scrape

Conclusion

In conclusion, it is never too late to make a mock scrape. Mock scrapes are an important part of deer hunting and can be used throughout the season to attract deer.