How to Wax a Compound Bow String

To wax a compound bow string, you will need a bowstring wax and an old rag. Begin by wiping the entire string down with the rag to remove dirt and debris. Next, apply a thin layer of wax on each strand of your bowstring using your finger or an applicator tool.

Then, work in small sections so that you can evenly distribute the wax throughout all parts of the string. Finally, let it sit for several minutes before wiping off any excess with the rag to finish up. This process should be repeated regularly to keep your bowstring clean and lubricated for optimal performance and durability over time.

• Step 1: Prepare the bow string for waxing
• Remove all dirt, debris, and old wax buildup from your bow string by using a soft-bristled brush or cloth
• This will help ensure that the new layer of wax properly adheres to the string
• Step 2: Apply a thin coat of wax to your bowstring
• It is important to use a quality bowstring wax such as Bohning Fletch-Lac Wax or Bowmaster String Wax as these products are designed specifically for use on compound bows strings and cables
• Using too much can cause excess buildup which could affect performance and accuracy when shooting arrows through your compound bow
• Step 3: Allow the first layer of wax to dry completely before applying additional coats if needed
• Applying multiple layers of wax will help protect against moisture infiltration, stretching, fraying, UV damage, dirt build up and more making sure that you get years out of your compound bow string without having to replace it prematurely due to wear and tear over time
• Step 4: After allowing each layer of wax sufficient drying time in between applications carefully inspect any areas where excess material has built up along with any other potential weak points or visible signs of damage on the bowstring itself that may need additional attention such as re-servicing splices or replacing worn sections etc… Step 5: Once everything looks good proceed with lightly buffing off any remaining residue from the previous coats using a clean cloth until desired results have been achieved then enjoy shooting with confidence knowing that you’ve taken proper care in maintaining not only safety but also optimal performance!

How To Wax a Bowstring – Humphries Archery

Do You Need to Wax a Compound Bow String?

Yes, you should wax a compound bow string. Waxing the string helps to keep it lubricated, which can reduce friction and wear that occurs over time from shooting arrows. Additionally, waxing the bowstring will help to protect it against dirt and debris in the environment while adding some protection against water damage.

It is important to be sure only to use products specifically designed for bowstrings when applying wax as other products may cause damage or negatively affect performance. Applying wax regularly (every 20-30 shots) can help ensure your compound bow string lasts longer and performs better for years of successful archery experiences!

How Do You Apply Wax to a Compound Bow String?

To apply wax to a compound bow string, start by ensuring the bow is unstrung before you begin. Next, clean your string of any dirt or debris that has accumulated on it. Once clean, take a candle and melt some wax over the flame in order to create liquid wax.

Using an old rag or cloth, dip it into the melted wax and then rub it along the length of your bowstring until all areas are covered with a thin layer of wax. After you’re done applying the wax, use another dry rag or cloth to buff out any excess residue from your string for best results. Lastly, restring your bow following manufacturer instructions and enjoy shooting with a properly maintained compound bow!

How Often Should You Wax a Compound Bow String?

It is generally recommended to wax the bowstring of a compound bow every 4-6 weeks, depending on its usage. This helps to protect the string from dirt and other particles that can accumulate over time and damage it. Additionally, waxing helps reduce friction between the strands of the string, which can cause wear and tear.

After any significant amount of use (such as during hunting season), be sure to inspect your bowstring for fraying or signs of weakening before re-waxing; if necessary, replace with a new string altogether. By following these simple maintenance tips you should have no problem keeping your compound bow in top shape!

Can I Use Chapstick for Bowstring Wax?

No, you cannot use chapstick for bowstring wax. Chapstick is a type of lip balm that helps to prevent and protect chapped lips. While it may have some lubricating properties, it does not contain the waxes or silicones needed to keep the strings on your bow in good condition.

Bowstring wax is specifically designed to reduce friction between the string fibers and increase their service life while also providing protection against moisture, dust and dirt. Additionally, chapstick can leave behind an oily residue which could gum up your bow’s string grooves over time; therefore it is best to stick with products specifically formulated for use on bows when looking for a good quality bowstring wax.

Credit: www.youtube.com

How Often to Wax Compound Bow String

It is recommended that wax be applied to your compound bow string every three months, or at least four times a year. Waxing the string helps protect it from dirt and moisture which can cause wear and tear over time. Additionally, this will ensure that you have smooth draw cycles while shooting your bow.

It’s important to use a high-quality wax specifically made for bows in order to get the best results and provide maximum protection for your equipment.

Do You Wax the Cables on a Compound Bow

When it comes to maintaining your compound bow, waxing the cables is an important step. Doing so will help ensure that they move smoothly through the pulleys and reduce friction between them. Wax also helps protect against dirt and grime build-up which can cause premature wear and tear of components over time.

To apply wax, simply rub a coat of high-quality cable wax on both sides of the bow’s string and cable system while pulling it through your fingers occasionally to evenly spread out the product. Make sure to repeat this process every few weeks or as needed in order for your bow’s parts to remain well lubricated for optimal performance.

Best String Wax for Compound Bow

String wax is essential for prolonging the life of a compound bow string. The best type of wax to use is hot melt or candle wax, as these provide superior protection and lubrication compared to other types of string wax. Hot melt or candle wax will help keep your strings conditioned while protecting them from dirt, dust and moisture that can cause wear and tear over time.

When applying the wax, it’s important to apply it evenly along the entire length of the string for maximum effectiveness.

Conclusion

Waxing a compound bow string is an important part of the overall maintenance and care of your bow. It will help to keep the strands flexible, increase durability, and provide better performance in general. Although it may seem intimidating at first, waxing a compound bow string is actually quite easy with some practice.

Through following these steps carefully you can ensure that your bow’s strings are properly cared for so that it continues to perform optimally for years to come.